Dranetz Guide Spécifications télécharger pdf (Page 46)

REAL TIME METER MODES

Scope Mode

Scope mode functions as an oscilloscope, displaying real-time

waveforms of voltage and current for up to eight channels

simultaneously, updated approximately once every three seconds. The

colors of waveform display are user programmable. Waveforms may be

displayed on a single or dual axis (overlaid or stacked). A range check

function shows the detected input range for all channels. Scope mode

also provides a textual display of rms values, division for axis values, and

frequency.

Dial Meters (graphical)

Dial Meters allow you to define the parameters, and create dial-type

readings of each channel or parameter. Readings are updated

approximately once every three seconds. Six dial type meters can be

displayed for any of the channel/parameters that are journalled. By

default, the instrument shows dial-type readings for Va, Vb, Vc, Ia, Ib, Ic.

Axis (end points of meter) can be changed on a per meter basis, and

journal limits can be shown as bands of colors on the dial face.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Pas de commentaire

Dranetz Guide Spécifications Page 46